ClassVR Removing WiFi Networks from your Headsets

Removing WiFi Networks from your Headsets

If you need to remove old or incorrect WiFi credentials from your headsets, you have two options:
  1. Remove all saved Wi-Fi networks from the headsets, OR
  2. Remove just one saved Wi-Fi network.


To remove all saved Wi-Fi networks

This deletes all saved network information! You will need to re-scan any saved networks.

If you would like to delete ALL saved Wi-Fi credentials from a headset instantly, to 'start from scratch', you will need to scan this QRKey. Open the Scanner by looking for the blue Scanner icon and pressing the select button. Then look at the key below using the headset.




To remove just one saved Wi-Fi network

Open the Scanner on a headset by looking at the blue Scanner icon on the homescreen and pressing the select button.
Scan in the QR code below to get to the device settings.

To navigate around device settings you can swipe and tap on the trackpad on the right hand side of the headset.
Or alternatively connect a USB mouse to the full size USB port on the base of the headset.

Select WiFi (by tapping or clicking).

Select the WiFI network you want to forget the credentials for

Select and tap forget.


Afterwards you will still see the network SSID but it will have forgotten the credentials and will not attempt to connect to it.


Press the back (return) button on the left hand side of the headset twice to exit the device settings and get
back to the VR lobby.

    • Related Articles

    • Bluetooth Interference on 2.4GHz Wi-Fi Networks

      We recommend that Bluetooth is disabled in organisations where headsets are connecting using 2.4GHz Wi-Fi networks, to prevent interference. To disable Bluetooth for your organisation, follow these steps (requires Admin or Owner permissions). From ...

    • Migrating to New Wi-Fi Networks

      Admin users can easily add new network details to the devices centrally, via the portal. From the ClassVR Portal, click the circle at the top right to access the settings page, then click the link to enter the Administration Portal. From here, ...

    • Connecting to different types of Wi-Fi networks

    • Connect to a WiFi Network

      The easiest way to connect to a new WiFi network is to use the ClassVR scanner and a QrKey. Create a WiFi QrKey The quickstart page allows you to generate WiFi QrKeys and QrKeys for proxy information (if your network uses a proxy). Select your ...

    • Setting a static IP

      Setting a static IP on the headsets can be achieved via QR code from within your Portal. Visit the QR keys page : https://portal.classvr.com/manage/qrkeys.cfm Under the WiFi section you can check the option to assign a static IP. If you have an ...