WiFi Connection Indicator

WiFi Connection Indicator

The notification area at the bottom of the ClassVR headset displays status information about the current WiFi connection.


The fan-shaped icon can be in one of the following states:

Icon
Description 

Successfully connected to a network.
The size of the white part of the fan gives an indication of signal strength.

WiFi is enabled, but not connected to a network.

Connected to a network, but the connection to the Internet is blocked.

WiFi is disabled.

There is an unknown problem with the WiFi system.
Reboot your device and try again.





    • Related Articles

    • Removing WiFi Networks from your Headsets

      If you need to remove old or incorrect WiFi credentials from your headsets, you have two options: Remove all saved Wi-Fi networks from the headsets, OR Remove just one saved Wi-Fi network. To remove all saved Wi-Fi networks This deletes all saved ...
    • Connect to a WiFi Network

      The easiest way to connect to a new WiFi network is to use the ClassVR scanner and a QrKey. Create a WiFi QrKey The quickstart page allows you to generate WiFi QrKeys and QrKeys for proxy information (if your network uses a proxy). Select your ...
    • Setting a static IP

      Setting a static IP on the headsets can be achieved via QR code from within your Portal. Visit the QR keys page : https://portal.classvr.com/manage/qrkeys.cfm Under the WiFi section you can check the option to assign a static IP. If you have an ...
    • ClassVR Hostnames and Ports

      Network check It may be the case certain local security settings or network restrictions are preventing these updates.  Visiting this URL on a computer connected to the same WiFi as the headsets will show you which host-names are accessible. ...
    • Turning WiFi On or Off using QR codes

      To turn the WiFi on or off on the headset you can use one of these QR codes.   Enable WiFi   Scan this QR code using the Barcode scanner from the homepage of your headset to enable WiFi.     Disable WiFi   Scan this QR code using the Barcode scanner ...